Hello, in this instructable i will explain how to make a mini fume extractor. This is more like an idea instead of being a guide.

Things i used:

1.Old not working AC 110v heater motor.

2.DC motor (From old DVD)

3.Small wood sticks

4.Hot Glue


6.Soldering tools


1.First glue DC motor to AC motors rotor. It must be on center.

2.Glue DC motor to frame with sticks.

3.Solder 2 wires to DC motor connectors.

4.Insert filter to the other side.

5.Test it with some smoke. It must pull air from filter side. If not you can reverse polarity.


Thank you for your interest.

About This Instructable




Bio: Exploring, searching, hacking... is my life. I am working on radiation, high voltage, programming, 3d drawing, hacking, music and...
More by Kutluhan:Sens3Box Mini Fume Extractor Nokia 5228-5230 Touchscreen Replacement 
Add instructable to: