Introduction: Mini Marker Fan

Picture of Mini Marker Fan

Its what I made at my free time ....
really it was fun making this ....

Step 1: Body

Picture of Body

First u need a Permanent marker for its body .....or any of the material u have..you can.also.use.a tooth brush .....

Step 2: Fixing Motor

Picture of Fixing Motor

then take a simple motor which u can find in ur RC car or Helicopter.......and place it over the cap of the marker ....and tape it or glue it with a strong one

Step 3: Giving the Power

Picture of Giving the Power

then attach the battery to the marker and join the wires with motor ....... and tape the entire battery ....

Step 4: Making the Fan

Picture of Making the Fan

You can use any material for making the fan..... I had used plastic bottle's plastic for blades as they give the curved surface to produce much breeze .....

Step 5: That's All Congratulations..!!!!!!

Guys hope u like it this was my first time I had done something like this ....so never mind if u didn't like it .....in my next project I will show u how to make led wheels.......thanks for your time...

Comments

tomatoskins (author)2015-09-24

Such a fun idea! Thanks for sharing and welcome to the community!

Thanks buddy

About This Instructable

144views

6favorites

License:

Bio: nothing to say ...
More by RoachSanderson:Mini Marker fan
Add instructable to: