Introduction: Mini Spear Gun

Picture of Mini Spear Gun

Step 1: Stuff You Need

Picture of Stuff You Need

Pvc pipe about 1inch diameter Some rubber bands or paracord Some cable ties

Step 2: Cutting the PVC Pipe

Picture of Cutting the PVC Pipe

Cut the PVC pipe to about 20 cm long

Step 3: Rubber Bands

Picture of Rubber Bands

If you don't have para cord use rubber bands If you have small rubber bands cut them in half And tie them together until you have a big one TIE THEM LIKE THIS

Step 4: Toeing Them to the PVC Pipe

Picture of Toeing Them to the PVC Pipe

Use the cable ties to tie the rubber bands on

Step 5: Then Your Finished

Picture of Then Your Finished

Then you can cut the cable ties and make your own spear or stick by dint be an idiot and shoot at people :)


haydendotcom (author)2013-09-06

I'm still only 10

haydendotcom (author)2013-09-06

Oh ok

unclelar (author)2013-09-04

I don't see para cord working in place of rubber bands.Para cord is not elastic,at least nowhere near enough to power any type of projectile.

About This Instructable




Bio: Hi there I am 11 year old boy and a like making weopons and stuff
More by haydendotcom:How To Make A Mini Cross BowHow To Make How To Make A Water Gun With A BottleSpear/ Arrow
Add instructable to: