Here's a solution I thought of, perfect for the poor college student or any intoxicant enthusiast.
You will need:
- 1 mini Keg
- A Sharp object ( I used a knife)
- A Hammer
- Pair of Needle-nose pliers
- 1 Nail
Step 2: Cut Off Top
WARNING: This next part is super dangerous and you may slice your finger off. Be careful.
Use a hammer to punch a hole in the metal with a kitchen knife. Pull the knife out after it's punched in and move it down a bit to slowly work your way around the can.
While there are better tools for sawing through metal, this method works fine for those that can't go buy fun gadgets. It takes a bit more patience (about a half hour), and you may ruin your knife, so pick one you don't care about that much.
Step 3: Fold Down Edge
Be careful with this part too, because the metal is every jagged.