Print PDF
Favorite
Email
A papercraft model to assemble the famous (and now re-valued) Mini-Moog, with its foldable panel.http://www.jamondelmar.com/deposito/mini_paper_moog.pdf
Remove these ads by
Signing UpStep 1What you need
You have to download the pdf model from http://www.jamondelmar.com/deposito/mini_paper_moog.pdf
You have to PRINT it, and cut it.
Note: straight lines ( _ ) are for cutting, but dotted lines (- - -) are for folding
And you also will need:
SCISSORS
GLUE (it can be any glue for paper, but you have to be careful with the quantity. I suggest you have a little PAINTBRUSH to distribute the glue properly)
CUTTER (any model, but not rotative)
PLIERS (a little one; you can use an old depilate pliers)
You have to PRINT it, and cut it.
Note: straight lines ( _ ) are for cutting, but dotted lines (- - -) are for folding
And you also will need:
SCISSORS
GLUE (it can be any glue for paper, but you have to be careful with the quantity. I suggest you have a little PAINTBRUSH to distribute the glue properly)
CUTTER (any model, but not rotative)
PLIERS (a little one; you can use an old depilate pliers)
| « Previous Step | Download PDFView All Steps | Next Step » |
Notice me when you do it, please
I have made an istrument called Cinthy with a 40106, see and hear it in youtube:
http://www.youtube.com/watch?v=D0cCDfUH-gE