ok since this spud gun is really held together by tape, it can explode so wear safety gloves, earplugs, and safety glasses.
i dont take any responsibility if you do get harmed by this gun, i also do not take responsibility if u harm other people or things.
sorry for the bad picture quality.
and for those who think i copyed it off youtube. i didnt because i made this before i saw the vid on youtube.
plz leave a comment.
Step 1: What you will need:
1x plastic peanut butter container.(or in my case a stock container but i highly recommend a peanut butter jar).
1x gatorade bottle top
1x pvc pipe barrel any sixe you want just as long as it isnt bigger then the gatorade bottle top.
1x lighter ignitor
Boxing tape and electrical tape
you might also need a knife.
Step 2: Step 1: preparing the chamber
warning: do not cut yourself lol like i just did.
Step 3: Step 2: installing ignitor
before you go onto the next instructions reinforce your chamber with electrical tape for safety.
ok we will need our thumbtacks for this. what you will have to do is make your thumb tacks look like this in side of your chamber \ / . once you have them looking like that connect the ignitor to the thumb tacks then check for the spark. if there is no spark you either have a shit ignitor that is broken or you are shorting out somewhere.