Picture of Mini test dummies
In this instructable I will show you how to make a mini test dummy.
Remove these adsRemove these ads by Signing Up

Step 1: Materials

Picture of Materials
-3/16 inch drill bit
-Lego Mini figure head
-Lego Mini figure body
-2 1/8 inch neodymium magnets
-super glue

Step 2: Head

Picture of Head
Shove the first magnet into the head. If it doesn't stay in you can use super glue.

Step 3: Body

Picture of Body
Cut off the peg on the guys body. Then drill into the part where the peg was. Now shove the magnet into the body. (WARNING make sure that the two magnets stick together).

Step 4: Done

Picture of Done
Done! Now you can use your dummy for all the tests you do!