Print PDF
Favorite
Email
Step 3Serial Port.
This step is short because the LED's deserve extra attention.
Stick the serial port to match the terminals on the board. When soldering make sure you get some solder underneath the soldering cups as well as in it. Don't forget to solder both sides down.
There's a close up of the finished serial port in the next step, as well.
Stick the serial port to match the terminals on the board. When soldering make sure you get some solder underneath the soldering cups as well as in it. Don't forget to solder both sides down.
There's a close up of the finished serial port in the next step, as well.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
