Instructables
My little Ikea Corner Desk work wonders, but it was ok when I used to live in a little apartment, now I have more space and I decided to build my self a minimalistic desk - kind of-, out of a door panel and some pieces of wood (from a Lade Ikea Bed) that I used to build 2 work horses, at a very low cost.
 
Remove these adsRemove these ads by Signing Up

Step 1: Materials

I save from the street a Lade Bed from Ikea, at least the wood pallet, great for all sort of stuff, and I also found a door panel in craigslist for free. this are the mayor components of this project.

7 Pallets (from the Lade Bed) for each work horse (2 work horses=14 pallets)
some other scrap pieces of wood.
1 Door panel, - hollow doors are the best-
4 Machine screws 1/4" - 3" long - bolts and washers
Drywall Screws - Assorted sizes
1-40 of 46Next »
Hylek made it!3 months ago

Thanks
for the great idea, I first made a SketchUp model.

I also used 1 IKEA LADE slatted bed base
(#058.251.00) 70 x 200 cm. The 14 slats
are 19 x 70 x 701 mm. I also used 2 IKEA OBSERVATÖR cross-braces (#677.973.00) 70 cm. I assembled everything with (more then) enough screws, nuts and bolts. Most times I'm beter save than sorry.

20140525_170542.jpg20140525_170704.jpg
Great desk! Love your creativity. I have built two desks and there are instructions and pictures on my web site. I will post them here too. Check it out - krazy4projects.com.
logicop1 year ago
Great minimalist project, I am typing on mine right now and it's awesome. Thanks for creating this! Built using 5x 1x4x8' (cut at 29" and 7.75") and scraps for ~10 bucks at Lowe's, and a door someone gave away on craigslist for free.
danmcegan2 years ago
Thanks for the instructable. Just what I needed.
DSCF1427.JPG
Okss.tm2 years ago
Picture of mine ! Nice instructables, thanks :)
IMAG02127.jpg
acoleman32 years ago
omg mate....your old desk looks like a *nightmare*. i bet you're totally chuffed with the new one.

健康と長寿 -影のモザイク-
(kenkou to choujyu -kage no mozaiku-)
(good health and long life -shadow mosaic-
acoleman32 years ago
oh....is the set back on the top of the sawhorse legs to keep the ends of the support rail from spiting out? i have a feeling they are.
acoleman32 years ago
this is the desk i am going to build for my scriptorium. i can appreciate its design since i am *also* a minimalist. im deffo giving this 5*.

健康と長寿 -影のモザイク-
(kenkou to choujyu -kage no mozaiku-)
(good health and long life -shadow mosaic-
MXR7892 years ago
Best $5.00 Desk Ever! I want to make one, but I might need more storage space than the work horses provide.
Viaticus2 years ago
Very nice Instructable! Thanks for making this contribution!
mportal3 years ago
is a amazing idea! hope make this in two weeks, thanks for sharing!
cajoberg4 years ago
AH! I've been looking for some kind of instruction or something because this is my dream desk, which is maybe a little silly, but I love the simplicity and architectural look, the workhorses are my favorite! It's exactly what I want to make.
ms.moth4 years ago
It looks great!!
Handsy6 years ago
Hollow core doors are great. But why stop at just the work surface? - Ditch the sawhorses. - Take a second hollow core door and cut it in half. These are now the legs of your table. The top and bottom of hollow core doors are not hollow, they are braced all the way across with solid wood. - Using 3.5" - 4" woodscrews, screw your legs to each end of your desk. Note: I ended up using a drafting chair because I like me desks to double as a tall workbench, but you could just as easily saw the second door (legs) to whatever height you needed. Just be sure to saw from the middle because you need the solid wood at the top and bottom for the screws to bite. Enjoy.
Table.jpg
Thanks for the input, but i honestly like the SawHorse design/look.
paupi5 years ago
¡¡¡Excelente!!!
johnrogers5 years ago
wall mount those guitars
Ean Uchiha6 years ago
(removed by author or community request)
(removed by author or community request)
(removed by author or community request)
?
?
?
james321746 years ago
Is there a more detailed section on the wooden workhorses, I'm a beginner woodworker and would love to know the angled cuts and perhaps a step by step process
If I remember correctly, Ikea has wooden workhorses very much like these, and for this very purpose. It'll be more expensive than building them yourself, but not by too much.
did you put any type of varnish on this bad boy? i enjoy the natural wood look, but as far as the desk goes it would probably get a fair amount of stains if i had it (coffee/drink rings, etc.).
arte.sano (author)  tyler.willmon6 years ago
I'm on it, I also like the natural finish of the wood, but I'm going to put at least one coat of a clear finish. thanks
abc123ll6 years ago
gets rid of that terrible glare off the window
didi606 years ago
I like your desk. I might get my husband to build one for me. Also I am going to find some win corks as we have a new laminate floor.
Markp.com6 years ago
This is great! Are the work horses sturdy enough? I would think a "leg" on each corner would be more stable. Anyway, the real reason I'm posting... did you make your guitar rack yourself? Is there an instructable on it? That looks amazing!
This design is plenty stable. I built a desk using a solid core door. I used a leg on each corner. When you do that you need to add stretchers to the legs to insure stability. One method isn't necessarily better than the other
I too have done exactly this several times. The trestles are a must for stability. U used some Ikea legs at first and they were gash since you really need something very substantial to screw them in to. The door is great because its 1) stiff, 2) normally veneered, 3) if it's not it has some kind of plastic laminate, so it's ready to go straight away, 4) it's really light weight for a table of it's size, most importantly, 5) it's CHEAP. I got a veneer effect door from MFI or somewhere for about £14. Wallop!
arte.sano (author)  Markp.com6 years ago
Actually I have to say, they are quite sturdy, very, and doesn't wobble at all. The triangular configuration of the horses is what makes it so stable. And thanks for the link of the guitar stand, that's a very fun project and extremely simple, I'm glad you like it.
Ah damn! Just found it... here's a link for everyone else!
http://www.instructables.com/id/Multiple-Guitar-Stand/?ALLSTEPS

:)
mehfridge6 years ago
I did something similar to this. I bought a prefab formica counter top, a set of folding table legs, and some 1x4 from Menards. Then you just screw the 1x4 to the counter top, and then the folding legs to those. You end up with a lightweight, sturdy, and portable table. Works great in the dorms, also you can pick up L shaped prefab if you have enough space.
rodie826 years ago
Nice desk! And what a great use for old wine corks!
mcbarnicle6 years ago
In the San Francisco bay area, building resources is a great source for doors and other large flat table top possibilities www.buildingresources.org
aardvark6 years ago
We have a desk Great-Grandfather made from a door. It uses 2 short file cabinets as the supports. It also has center drawer he made, but the file cabinets are very easy!!
arte.sano (author) 6 years ago
Hi all, thanks for the comments: Drinkmorecoffe, yes that's a dulcimer in the wall, Jake, trebuchet is right, the approach to the construction is minimalistic, very simple I'll say, tho there's only two screens the pc's are undernit. cheers
Cool. Do you play your dulcimer, or just hang it on the wall? :-P
1-40 of 46Next »