Step 1: Cardboard Tube
For this step I scored the cardboard about every 3 inches with an exacto blade. This allowed it to for a cirle around the hulahoop. I then attached the cardboard after drilling a few small holes to the hoop with some tiny zip ties.
Step 2: Goggles
Following the same design, I scored the cardboard again about every 2 inches, and wrapped it about a circle. This time I used a 7" place. I help it in place temporarily with masking tape while I hot glued it together. Then I covered these with plain copy paper, as I wanted them to have a smoother finish, and painted them grey.
Step 3: Yellow Fleece
Finally I covered the whole thing with quilting batting I had leftover from a long ago project, and then yellow fleece. The fleece was the most expensive part