Print PDF
Favorite
Email
Step 3Preparing the Tin
Step 1:
Eat all the mints in the box. Now take some Peptobismal because your stomach is killing you.
Step 2:
You have to drill two holes in the lid of the tin for the machine screws to pass through. The holes should be spaced as follows:
1st hole- 3/4" from the bottom side of the tin and 5/8" over from the left side of the tin.
2nd hole- 3/4" from the top side of the tin and 5/8" over from the left side of the tin.
The holes should be a tiny bit wider than the machine screws you are using.
Eat all the mints in the box. Now take some Peptobismal because your stomach is killing you.
Step 2:
You have to drill two holes in the lid of the tin for the machine screws to pass through. The holes should be spaced as follows:
1st hole- 3/4" from the bottom side of the tin and 5/8" over from the left side of the tin.
2nd hole- 3/4" from the top side of the tin and 5/8" over from the left side of the tin.
The holes should be a tiny bit wider than the machine screws you are using.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
