loading

Step 3: Attaching the Rubber Bands

Picture of Attaching the Rubber Bands
1. Put two rubber bands on the gun, as shown in the picture.

Enjoy your moderately powerful darrenger!

Notice: This gun has an auto-safety mechanism if you put the rubber bands on the way it is shown in the picture. This means that when you pull the firing rod back the appropriate length, it should lock into place.

Other than that, it is a simple K'Nex gun.
 
has anyone actually noticed that only noobs are using this ible?
(then asking how to use the principle mechanism in knexing)
mom1234 years ago
if you put lots of rubber bands i shoots far
zach2420044 years ago
i want true trigger and automatic
Nothing2it5 years ago
needs more work, bad accuracy
mikey2885 years ago
This thing is awesome with 4 rubber bands!!!!
how and what does it shoot?
it shoots little green rods and to find out how read the guys at the top
bob19146 years ago
That's a cool gun! and it shoots OK.
coleslaw36 years ago
Alright ILL tell you how it works put the rubber bands as shown then pull the orange connecter connected to the blue rod thats through the hole of the gray caps pull it back then the yellow rod thingy should move on its own now put a green tiny rod in the hole thats blocked from the blue rod that you pulled back now pull the red triangle connected to the yellow thingy back the green tiny rod should shoot about 25 feet with 4 rubberbands it should curve the gun dont mind it its not a bad thing ok. Check out my sheild instructable if you want.
i dont undrtstand how or what to shoot :( please reply