With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Before I even knew instructables I built this lamp to mount over the coffee table in my basement. I think copper must have been a lot cheaper back the...
I made a sketch first and then figured out how many fittings I would need. Then I laid it out on the floor to check if I had everything. It has its ad...
As you can see, assembly is quite straightforward. Just take a copper fitting, apply glue according to the instructions and press together.
What I would do differently next time is the use of Bekelite lamp sockets. I guess back then I didn't have other sockets and I had to cover the bare w...
Similar to the lamp sockets a threaded pipe is inserted in the 1/2" to 3/8" reducer and a 1" loop with wire way is screwed on. This can be hooked up t...
In order to be able to adjust the lamp to a convenient height over the coffee table, 2 1' foot extenders were added. These consist of 2 1' pieces of 3...
Sit down, enjoy that wonderful golden glow and read a good book.
Remove these ads by
Signing Up
Not NiceInappropriateSpam2,044 views
9 favorites
Posted:
Apr 6, 2012
License:
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »