Step 12: Keyboard Illumination

Looking at my steampunk keyboard, it looked quite plain to me. So I decided to add a keyboard illumination. (For further information look for "keyboard LED" on this site)
Some brainstorming over a glass of $5 wine (can something good come from that???) and I had an idea how to accomplish this.
As you can see, I attached an arm to the connecting pipe which contains 2 bright LED's (13.000 mcd) hooked up to the 5V supply of the key board. (LED calculator)
In hindsight I would attach a street 45 degree fitting directly to the T (it would fold nicer)
<p>What an outstanding detailed tutorial, this is everything an instructables project SHOULD be. There's a lot of stuff here I'll be able to use / adopt for my own project, thank you. :)</p>
inspirational indeed! best used with steampunk typing style haha!
<p>I think this my fifth visit to this site and was one of a few that served as the inspiration for my own steampunk project. Great detail and a superb instructable.</p>
<p>Thx and let us read about your own project!</p>
<p>I know I am late to the party- But nice job. Great Instructable with good photos and excellent job with the step-by-step. Nice Work!</p>
<p>I might have tried to make a jig to hold buttons and the stems aligned on center while gluing. Maybe some layered cardboard?</p>
As a typewriter collector I sincerely thank you for not destroying a typewriter for your project. It looks great!
Simply Awesome !
That keyboard is stunning.<br><br>When will someone steampunk a PC? That would be nice to go with that beautiful keyboard.
There are many steampunk PCs. Google Steampunk PC or visit the forums at Brass Goggles.
steel water pipe nipple with ID nearer to what you want cut square and sharpened with a file while spinning it with a drill motor makes a good makeshift paper punch
If I remember correctly, we used a hair dryer in arts &amp; crafts (40 years ago) to remove bubbles. The same technique works great with epoxy.<br>I am enjoying this instructive very much and may see what I can find at the Goodwill for parts...<br>
McAfee said it was dangerous to download GIMP. Really? I want a free, safe Photoshop, and not Paint.NET! I need a more sophisticated program. Any suggestions?
To the Author: BEAUtiFUL keyboard!<br><br>To JasonMyers:<br>Try AVG Free Edition, it's got so many more accurate signatures than the &quot;pay for your continued fear&quot; commerical programs. Last time I got the GIMP it was fine and I checked it with a few different anti-vir programs. <br><br>Sincerely,<br>DIY-Guy
AVG Free Edition has gives ALOT of false positives.
My suggestion is: Don't listen to McAfee :)
For the wiring of the led light you could have used the copper tube to guide the wire to the side and there make a hole in the side of the keyboard, which is covered by the copper tubes anyway.<br> That would keep the wires out of sight and less 'vulnerable'.<br> It would also make it possible to place the on/off switch of the leds in the keyboard case.<br> btw, you really should have used a metal toggle switch. One that has this red and silver plate with the on/off text. Much sexier than a slider... ;)<br> <br> Nice keyboard anyway.<br>
I would try an abrasive blade like for masonry <br>The black ones with no teeth,<br>I am pretty sure they make the same type for metal .
Very interesting project, great work !!!<br /> Here's a suggestion for the steam gauge, use a voltmeter that looks like a steam gauge but hook it to the hard disk activity LED indicator. This way everytime there is HDD activity the steam gauge would show some movement. You could add more gauges for temperature and fan speed as well.
Great idea, thx and in one way or the other I plan on using it for the upcoming computer case mod. Hmmmm, now where would I find out how to hook it up to measure temperature and fan speed.... LOL<br />
temperature=thermistor coupled to VOM, charted to F temp<br> <br> fan speed=amps of the fan converted to scaled speed chart<br> <br> great looking KB
wow, functionality, what a novel concept (lol). great idea! i might just do that.
Another cool addition to the led-gel lights would be to have the light fade away or seem to be radioactive. I think this could be produced with the use of another instructable: https://www.instructables.com/id/Glow-in-the-Dark-Hair-Gel/#step1 . Only question would be if the light still diffuses through it as well as it did through clear gel.
Love it! Reminds me a bit of Datamancer's, but he used typewriter keys instead of your ingenuous method! I very neat way to make it for those of use you sadly do not have old typewriter to cannibalize!
I've been looking for a way to illuminate a mini keyboard, and now I'm just going to have to steampunk it too. Thank you for the inspiration!
Very nice job, young lady.
I would love to try this out, my only problem however is I'm pretty sure the keyboard would no longer function as a gaming keyboard, haha.
Just having some small problems getting the picture you put up of the keys you made to turn into pictures so I can print them out. Any advice on how to make it into a .jpeg or other image file? Other than that, this 'ible is awesome. Very steampunkish.
how big where the buttons? (actual buttons and diameter inside of rim)
Great stuff! Well done! :)
Clap,Clap,Clap ( Standing ovation crowd noises) that is fricking sweet.
I swear they are using this board or one very like it (Minus the light) as a prop on Warehouse 13 this season...
hey Rowen27, I may be wrong but I think that keyboard was made by Richard &quot;Doc&quot; Nagy from Datamancer.net. Like I said I may be wrong but you should check out his absolutly beautiful creations anyway.
entirely possible, I was only able to get a glimpse of it from time to time, and my DVR doesn't do frame by frame *Doh!*
If I had the patience to do this I would probably pour some resin into the buttons, so that the stickers don't get ruined.
sorry for the trouble i was able to download file after all thanks manuel
Hello and great work! ! I have tried to download the key pdf with no luck. I do realize you had mentioned the temp / exe file but it acts like the file is not on the server thanks manel
In terms of cutting the copper pipe, my first suggestion would be to use a band saw instead of a table saw. Cutting smaller diameter things on a table saw, especially metal things, can be dangerous, and in terms of using metal, could be bad for the saw blade at the very least. Clearly it worked. but band saws are pretty much built to do this kind of operation.
why not use a pipe cutter? Cheap, easy and no noise or sparks.
'cause a pipe cutter wouldn't do the cut they needed; it can cut pipe to length, but not in half, length-wise... Re-examine the shots in steps 10, 11, &amp; 12, and you should be able to see how they cut the pipe in half, along its' length, to frame the keyboard.
Ahh I see it now. Thanks
just a thought,but have you thought of &quot;filling' the keys to the rim with a clear plastic or nail polish maybe 'dome' them It might make for a longer life of the lettering and may add to the look
I love this 'ible. I admire that you were willing to take a brand new keyboard and punk it out ! Great inspiration and fabulously well done !! saved to my favorites to try very soon !
This is so incredible. I thought it was so cool but wondered, what is this steam punk? So I googled a bit. Now i'm in big trouble. I think I might try this.
This is one of the best SteamPunk projects I've seen... This one I have got to try.
Epic!! Definantly better than a lot i have seen even people with heaps of experience. Also a lot easier to build than some i have seen as yours doesn't involve casting. Only thing you could improve is put a small copper gear over the left hand side of the velvet.
Thank you very much. I would even cast something if there is the need for it, it's not that difficult.<br /> If I put&nbsp; a small copper gear somewhere, it should imply that it serves a function, meaning there should be more to it. As an inspiration take a look at pictures of victorian steam somethings to see what I mean.<br />
Great job, and for the guy who said you should put a gear on there or w/e, what abot making a power fake, and attaching it to the side or something, there's a video by kipkay the shows how to make one, then all you would have to do it make it match the keyboard they can like control volume and brightness and stuff, just an idea
<p><a href="https://www.instructables.com/id/Desktop-Scroll-Wheel-and-Volume-Control/" rel="nofollow">What about this</a>? This would fit i well and look good as a medium sized cog/gear and would fit the theme. What do you think? Too many wires? Or could you use a bigger shoelace like the mouse mod you did and fit all the wires in that?</p>
Hmmmm........ , a wheel from a plastic buggy wasn't necessarily what I was thinking of and there is nothing on this keyboard I&nbsp;could influence with a scrollwheel.<br /> If you look at this <a href="http://www.etsy.com/listing/45103373/steampunk-usb-flash-drive-8gig-brass" rel="nofollow">steampunk USB drive</a>, there is a window with gearwheels underneath which do absolutely nothing but imply that there is a working mechanism in it, that's what could be added.<br /> Thank you for your input.<br />

About This Instructable




Bio: You might call me "Jane of all trades, mistress of none"; "all" is definitely an exaggeration but I am interested in lots of "trades" and ... More »
More by MissBetsy:Miss Betsy's Excellent Bacon Miss Betsy's Cold Smoke Generator Miss Betsy's Rechargable Solar Nightlight II 
Add instructable to: