If you like somebody, make and give this person a mixtape. If you want to show your rebellion and test your parents, make yourself some mixtapes and manage to have them played in the car. All the time.
USB flash drives, today, are as handy as cassettes almost were yesterday.A few years ago, I saw a cardboard mixtape-shaped USB drive case there, and found the USB idea quite neat. But I wanted something more, well, authentic.
And very recently, I wanted to share music with a person I like.
The above intro picture tells it all, you now have the whole concept. Really want more details? read on...
Remove these ads by
Signing UpStep 1: Needed Stuff
- A compact cassette. A model assembled with screw, not heat staking. So that you can open it.
- A cassette box.
- A cheap USB flash drive, with a physical size that can fit into the cassette, as described in the next step. The keyring hole position should be placed so as to ease the placement of the pivot, if possible using one of the cassette's small holes (see step 4).
- You will also need one small (M2) screw, and two nuts.
- Screwdriver
- Cutter or X-Acto knife
- File
- Drill press (or Dremel) to adjust the USB flash drive
- Flat pliers















































Visit Our Store »
Go Pro Today »




I will make same project for me :D
Thanks for sharing!
as i was reading your walkman comment i got an idea for a possible version 2:
have the usb plug capable of plugging into a walkman modified to have a usb connection inside for the flash tape, then give that to your friend as well, in my opinion, it would add that extra little touch to the perfect gift.
the one thing i can still remember about tapes though, there was no skipping when you hit a bump in the road...
And don't forget rewritable with no DRM. if you didn't like the band, a strong magnet and it was all over.