In doing this project the DIY'er holds all responsibilty for any type of damage. Whether it physical, mental, or property.
The brain of the project is a Xbox softmodded with linux running XBMC (Xbox Media Center) and a 250gb hard drive. There will be no section in this tutorial on how to softmod or instal XMBC on your Xbox. There is more than enough information already out under that subject. This project will show how you can take an Xbox and have the on/off, eject/close buttons, and the dvd drive in the center console for your convenience. It seems like a silly idea but imagine carrying your entire itunes library and any shows or movies you would like to watch on a long drive (as long as your not driving, Dangerous!!).
In this project I handled all the hardware situations but the software installations was all my friend BJ (so thank you, sorry missed halloween)
Remove these ads by
Signing UpStep 1: Opening the Xbox
I unfortunately did not have version 1.0 to 1.5 so i do not know exactly how to but you can use the converter to take the power from the car (12v) and use it to power the xbox directly. I had to use an old fashion inverter, which isn't bad but it would of made the project so much cleaner, more built in, if you will.
Well this is what my boxed looks like now. Pretty simple stuff. The bottom left is the two inputs for the 4 controller ports. Top right (bigger box) is the Ide cable which I kept as the flat ribbon style. I definitely think it is possible to get the rounded type of Ide cable for this project but I have not tried it. The small top right box is the power to the dvd drive, incredibly small wires. The mid right is the fan which I thought I should keep in there since it will be under a hot seat with not a whole lot of ventilation. The big middle box is the power cables to the hard drive, pretty self explanatory.











































Visit Our Store »
Go Pro Today »




EVERYONE RUN FOR THEIR LIVES!!!!!!!!!!!!!!!!!!!!!