Introduction: Modern Style Table From Scrap Plywood
I had a lot of leftover plywood and veneer and always thought ply has its own interesting symmetrical grain.
So with a lot of glue and clamping I finally got the result I wanted.
The general shape was cut out with the band saw.
I finished up with a disc sander.
Niall Mc Keown.
http://www.designagainstthegrain.com
Step 1: Gluing the Blocks
Step 2: Make the Pattern
Step 3: Cut Out With the Band Saw
Step 4: Sand Up to 220 Grit Sandpaper
Step 5: Use Shellac to Finish
Finalist in the
Furniture Challenge