Print PDF
Favorite
Email
Step 15Attach the End-panel Moulding
As you face the open side of the crib, attach the 28" length of moulding to the left end panel with painter's tape, so that it spans the full height of the side rail. Mark through each of the clearance holes onto the end panel.
Remove the moulding, and drill 3/32" pilot holes at each of the marks, 1" deep, using a drill-stop on the bit. Attach the moulding using #8x1-1/2" wood screws.
Remove the moulding, and drill 3/32" pilot holes at each of the marks, 1" deep, using a drill-stop on the bit. Attach the moulding using #8x1-1/2" wood screws.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
