Print PDF
Favorite
Email
Step 16Mind the Gap (1)
Close the gap between the moving rail and the mattress using the 25" length of moulding. Align the moulding along the top edge of the mattress support panel between the end of the fixed half-rail and the left-hand end panel, and mark through each of the screw holes.
Drill 3/32" pilot holes through the mattress support panel at each screw location. Attach the moulding to the panel with #8x1-1/2" wood screws.
Drill 3/32" pilot holes through the mattress support panel at each screw location. Attach the moulding to the panel with #8x1-1/2" wood screws.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
