So as i watered it .The water would only get down to about half way down the Topsy Turvy So not all the plants were getting food and water .So i got a idea and this is how it all worked out .
Step 1: Feeding Tube Drawing
Step 2: Cutting the feeding tube
#2 and #3 shows me putting a mark every 1 1/2 inches all around the tube.
Step 3: Drilling and capping the tube
2nd and 3rd pic shows gluing a 1 1/2 end cap to plug the end of the tube.
4th pic shows it all finished and ready to insert into the Topsy turvy.