*True Bypass Mod
*Volume Boost Mod
*Wah-Volume Pedal Mod
After having completed all of these mod and a few others I recommend doing them one at a time and testing in between mods so if you don't like something, you can easily reverse it.
Your gonna need some basic soldering tools...
-good soldering iron (mines a Weller WESD51D I got for christmas)
-helping hand (a must!!)
also the to wire anything to the board itself you will need 24AWG wire
Step 1: Research
http://www.geofex.com/- click "FX Technology
-Technology of the..." in the upper left
These are some pictures I found useful...
Step 2: True Bypass
I chose to remove the input buffer because it seemed to be the most easily reversible and from what I read, sounds better.
1. Open up the case and remove the circuit board.
2. Desolder the components.
3. Desolder the switch.
4. Install the new switch. (i used a 3PDT switch. Check out ebay for good deals)
If you use a 3PDT switch you can also add an LED to you pedal but I didn't want to.
Check It Out