Print PDF
Favorite
Email
Step 3Prepare the split-image focusing screen!
Now you have to disassemble the old focusing screen that you'll fit into EOS-300. It depends on where you getting it from. Only make sure that it is something that you can take out without damaging. Also, you have to make sure that the size of the new screen is similar or larger than the old one so that you can fit it in the camera after some alterations.
Below are the photo steps for a Canon F-1focusing screen I found laying around in my drawer.
Below are the photo steps for a Canon F-1focusing screen I found laying around in my drawer.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
