Print PDF
Favorite
Email
Step 2Open the charger
You need to disassemble the charger (actually you could probably do this in a USB extension cable, but I didn't want any more clutter).
Take the fuse and cap out. Then you need to split the charger open. Mine was welded together so I had to saw through both sides of the case and then lever it open. Don't cut too deep with the saw or you'll end up going through the components of the charging circuit.
Take the fuse and cap out. Then you need to split the charger open. Mine was welded together so I had to saw through both sides of the case and then lever it open. Don't cut too deep with the saw or you'll end up going through the components of the charging circuit.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
