With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
share step-by-step photos with text instructions
share one or more photos in one step quickly and easily
share your how-to video
This will show you step by step, with photos( a million of the dang things) how to fold this dragon I designed. It may look complicated but trust me, ...
This is going to be a busy project. To complete it you will need: 1. Paper -5 or 6 sheets of regular printer paper, (20lb -...
you are going to need to cut your paper into small rectangles that are twice as wide as they are tall. For the dragon in the picture I used 2 inch by ...
Good Job, you have finished your first modular unit. take note of the two flaps and the pocket in the picture below. Now go make about 120 more of the...
Assemble the modules by inserting the tabs into the pockets, as we go this will make more sense, but trust me, it is very simple. You add new modules ...
Ok, so you have your modular units, and you have a mildy confused idea of how they go together. Good. The assembly will start making a whole lot more ...
ok, lets change views and start on the hard part.
Now we need to make a place to add the spikes while continuing the body construction.
Now to start on the mounts for the rear legs and the tail.
Your model should look something like this by now.
Now we are going to make the legs, you will need 26 units for this step.
This step shows you how to modify units to make the feet and horns. you will need 5 units for this step. Remember to save one of the claw units for th...
these are more modified units, i call them the spike units. You will need to make seven of them for this dragon. 4 for the back, 2 for the head, and o...
It is time to add a spike to the tail. You will need a claw unit for this.
Now we are going to add the feet to the legs (see i dint forget) and then attach the whole thing to the body. Remember, the front legs were slightly l...
Your dragon is mostly done! you can paint it at this point or you can try to glue him together! To glue him beak him down into sections. i like to do ...
Tag files as:
How to make an origami Baby Dragon!by TCGames
How to make an Origami Dragonby ChrysN
Origami Dragon Boat!by TCGames
How to make an Origami Dragon Boat (Ship) - TCGames [HD]by TCGames
How to make an Origami Dragonby jabapyth
How to fold an Origami Dragonby jabapyth
Pokemon Crobat Origamiby w1l50n1404
Origami Dollar Bill Dragonby origamic12
Origami: Modular Boat Fold Pinwheel!by TCGames
Scoochmaroo Refrigerator Magnetby sunshiine
Download our new apps for iOS and android!
©Copyright 2013 Autodesk Inc. All rights reserved.
PDF DownloadsAs a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.