With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
share what you made with text, photos, video, and files
gather your favorite instructables together
This will show you step by step, with photos( a million of the dang things) how to fold this dragon I designed. It may look complicated but trust me, ...
This is going to be a busy project. To complete it you will need: 1. Paper -5 or 6 sheets of regular printer paper, (20lb -...
you are going to need to cut your paper into small rectangles that are twice as wide as they are tall. For the dragon in the picture I used 2 inch by ...
Good Job, you have finished your first modular unit. take note of the two flaps and the pocket in the picture below. Now go make about 120 more of the...
Assemble the modules by inserting the tabs into the pockets, as we go this will make more sense, but trust me, it is very simple. You add new modules ...
Ok, so you have your modular units, and you have a mildy confused idea of how they go together. Good. The assembly will start making a whole lot more ...
ok, lets change views and start on the hard part.
Now we need to make a place to add the spikes while continuing the body construction.
Now to start on the mounts for the rear legs and the tail.
Your model should look something like this by now.
Now we are going to make the legs, you will need 26 units for this step.
This step shows you how to modify units to make the feet and horns. you will need 5 units for this step. Remember to save one of the claw units for th...
these are more modified units, i call them the spike units. You will need to make seven of them for this dragon. 4 for the back, 2 for the head, and o...
It is time to add a spike to the tail. You will need a claw unit for this.
Now we are going to add the feet to the legs (see i dint forget) and then attach the whole thing to the body. Remember, the front legs were slightly l...
Your dragon is mostly done! you can paint it at this point or you can try to glue him together! To glue him beak him down into sections. i like to do ...
We have a be nice comment policy. Please be positive and constructive.
Origami Paper Flower - Paper flower folding (By OrigamiArtists)by OrigamiArtists
How to make Origami Elephant - By Origami Artistsby OrigamiArtists
How to make Origami Birdbase - By Origami Artistsby OrigamiArtists
How to make ORIGAMI paper boat ( By OrigamiArtists ) HDby OrigamiArtists
How to make Origami Paper Crane - By Origami Artistsby OrigamiArtists
How to make a Origami Heronby OrigamiArtists
How to Make an Origami Butterfly : By OrigamiArtistsby OrigamiArtists
How to make Origami Flapping Bird - By Origami Artistsby OrigamiArtists
How to Make an Origami Swan (For Beginners): By OrigamiArtistsby OrigamiArtists
How to Make a Origami Paper Airplane Glider - By OrigamiArtistsby OrigamiArtists
Download our new apps for iOS, Android and Windows 8!
© 2015 Autodesk, Inc.
By clicking "Create Account" you are indicating that you have read and agree to the Terms of service.
Already a member? Login »
Enter the email associated with your account and we will send you your username and a temporary password.
Not a member? Sign Up »