Print PDF
Favorite
Email
Step 4Run the wire to the fence
Run the wire through the ceramic insulators and connect it to the fence.
You can go a couple hundred feet, if the wire is properly insulated. A color monitor's flyback typically puts out around 30,000 volts, with very low current.
Make sure to put the fence on Styrofoam to insulate it from ground.
You can go a couple hundred feet, if the wire is properly insulated. A color monitor's flyback typically puts out around 30,000 volts, with very low current.
Make sure to put the fence on Styrofoam to insulate it from ground.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
9
Apr 8, 2011. 12:08 PMhighvoltageguy
says:
never find insulator cuz im unlucky
Reply
 |
Add Comment
|
