Print PDF
Favorite
Email
Step 2Make your templates
1) Start by drawing round your business card onto a piece of paper, leaving a 5mm margin around the edge. Do this twice, leaving a 5mm margin around each one - this will leave a 1cm space between them.
2) This is what your template should look like so far.
3) Draw a 4 x 4cm square on the edge, this is where your velcro tab will go.
4) Cut this template out using paper scissors
5) Cut another square the same width as your main template, but 2cm narrower than your business card. This will be the pocket that your business card sit in. The dashed line indicates the middle fold in the holder.
2) This is what your template should look like so far.
3) Draw a 4 x 4cm square on the edge, this is where your velcro tab will go.
4) Cut this template out using paper scissors
5) Cut another square the same width as your main template, but 2cm narrower than your business card. This will be the pocket that your business card sit in. The dashed line indicates the middle fold in the holder.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
