Step 1: Instant Bicycle Rear Cargo Rack
My pal Corwin Hardham made this really apt bike rack by cutting the rear part off of one bike frame and welding it onto another. Very slick. Once you see it it seems obvious.
I don't usually do instructables that involve welding because someone might not have a welder.
But this rack is so cute I couldn't resist.
If you don't have a welder, flatten the ends of the tubes with a hammer, drill holes in them, and bolt them to your bike frame.
I don't usually do instructables that involve welding because someone might not have a welder.
But this rack is so cute I couldn't resist.
If you don't have a welder, flatten the ends of the tubes with a hammer, drill holes in them, and bolt them to your bike frame.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Ahmedqatar says:
Jan 10, 2008. 4:44 AMReply
Very useful !!
47
dan says:
Sep 5, 2007. 10:03 PMReplyit's a sweet mod, but i'm not so sure it is "instant"
Visit Our Store »
Go Pro Today »
