Step 23: Stirring Stick from Rod and Wire Ties
Vincent Bachet uses this trick to mix his epoxy.
A few wire ties on a thick piece of wire.
Spin it with a drill. Works like a charm.
When it gets gunked up, just hit it with a hammer to break off the old stuff and the wire ties with it, and add some new wire ties.
A few wire ties on a thick piece of wire.
Spin it with a drill. Works like a charm.
When it gets gunked up, just hit it with a hammer to break off the old stuff and the wire ties with it, and add some new wire ties.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
