Instructables
This is my first Instructable

If you haven't heard of the new craze called drift triking then you are missing out!

A drift trike consists of a tricycle with a pneumatic front wheel and hard plastic rear wheels.

The front wheel can have a freewheeling crank or foot pegs

Original Drift Triking



If you you like this instructable please vote for me in both "Make It Move Challenge" and the "Toy Challenge"
 
Remove these adsRemove these ads by Signing Up

Step 1: History

Drift Trikes are tricycles that have slick rear wheels, normally made from a hard plastic material. They are usually ridden on paved roads with a steep downhill gradient and some corners. Smooth roads are preferred to coarse chip sealed road as coarse surfaces tend to wear rear wheels faster.

Riders gather momentum through gravity, although some drift trikes have pedals. Pedals are useful for slow speed riding, but are of no use at high speed. Drift trikes can reach speeds of up to 90km/h, but the normal operating speed is between 25 and 65km/h.


http://en.wikipedia.org/wiki/Drift_Trikes

Drift trikes have come along way, one of the first mass produced trike was the Huffy slider as pictured.

Many people upgrade huffy sliders where as some build them from scratch. In this instructable I will be using the front end from the slider and building a bolt on MOTORIZED rear end.

Most of the parts can be bought bought from the hardware and the rest from eBay.

Step 2: Part List

I have split the parts up into where I bought them

Bunnings

1x     m16 threaded rod (Found with the nuts and bolts usually, length is approx 1m
10x   m16 nuts
2x     1m lengths of 30x30mm steel stock
1x     1m length of 20mm steel angle

Various nuts and bolts

Online


1x 49cc pocket bike engine with clutch (eBay) known as a cag engine
1x Pocket bike muffler
1x 7 tooth pinion 25h
1x 62 tooth sprocket 25h
1x 25h chain 

Other

Bearing store 2x 16mm pillow block bearings

I was able to find some things around the house including fuel tank, fuel line and chain tensioner
1-40 of 81Next »
aspato22 days ago

can you send me one picture of the drift trike´s meausurements pls here is my email diegofernandez8991@gmail.com

where can i buy the wheel hub? and what holds it to the shaft? is it welded to the shaft? please reply i would love to build 1 of these for my son...

Here you go man, this website has lots of good things for builds like this.

http://www.bmikarts.com/Wheel-Hubs_c_304.html

AustinL1 month ago

Price range?

13224 AustinL1 month ago

depens how big

jeff.noyes.312 months ago

I could use more details on your wheel set up. I can't find 10" wheels on ebay, and of the ones I find, they have their own bearings. Where and how did you make this set up?

First of all cool idea. but here is my issue. where do i buy the wheel hub? or what can i use for a wheel hub? and is it welded to the shaft? what holds it to the shaft so it drives?

bmarble127 months ago

is your threaded rod only threaded on the ends or is the whole rod threaded?

Benheywood8 months ago
What and where did you get those wheels?
cwcorbin8 months ago

It's been a little while since you posted this instructable. Looking back on the project, are you happy with all of the choices you made? I am looking at building one, and am wondering if the CAG 49cc motor is still a good choice in your opinion.

isaacwilk9 months ago

I'm looking at making something like this... just to make sure - it has a centrifugal clutch right? (like a chainsaw - it engages when the engine revs high enough)
I've got a 50cc motor, but it's pretty gutless. Wondering if a centrifugal clutch will allow the wheels to spin out or not...

robot79710 months ago

i kind of want one of these

but i am not skiled enough to build one

is there a dutch guy who wants to help me?

mattwilkinson11 months ago
What holds the sprocket in place?
Lpower931 year ago
Thanks for the tips. For those who cant find sprockets, sprocket hubs/clamps and pillow bearings here's the links.
http://www.ebay.com.au/itm/Mini-Pocket-Bike-68-Tooth-Drive-Sprocket-Air-Water-Cooled-Models-Extra-Speed-/171151357587?pt=AU_Motorcycle_Parts_Accessories&hash=item27d96a7693&_uhb=1

http://www.ebay.com/sch/i.html?_odkw=pocket+bike+sprocket&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR3.TRC1.A0.X5%2F8+pillow+bearing&_nkw=5%2F8+pillow+bearing&_sacat=0

http://www.ebay.com.au/itm/Mini-Pocket-Bike-68-Tooth-Drive-Sprocket-Air-Water-Cooled-Models-Extra-Speed-/171151357587?pt=AU_Motorcycle_Parts_Accessories&hash=item27d96a7693&_uhb=1
Deriva981 year ago
What did you need the steel angle for in the end? I'm building this right now so please reply! :)
bowmaster3 years ago
Do you think a 190cc lawn-mower engine would work? I know it had 6.25 ft-lbs of torque, but I don't know about HP.
that would power it all right, and maybe too much power at that!
josh333 (author)  bowmaster3 years ago
Im sure it would have more than enough power..
if this is in australia which im pretty sure it is WHERE DO U GET UR PILLOW BLOCK BEARINGS!!!! pls help also im making an electric one :)
http://www.thebigbearingstore.com/pillowblockbearing.html
willisdaye1 year ago
Yo I got an old craftsman chainsaw motor to hook up to a trike. do you think I could get a clutch for that? Like a pocketbike clutch?
gamnoparts1 year ago
I'm gonna start out by saying we had big wheels & mean green machines in the 80's, not necessarily new... But I'm gonna finish by saying adding the engine is a ridiculously cool idea.
jbod11 year ago
What's a wheel hub
how much di it cost?
AJD421 year ago
Where did u get that trike please get back thank you
http://www.target.com/p/huffy-green-machine-20/-/A-14071656
I saw this one way cooler
MicahMan101 year ago
Id like to know what size drive your engine has, because i have an 87 cc 1/2 inch drive that i am trying to find a pinion and sprocket for...PLEASE help me!
mmkaliski1 year ago
I notice that this engine does not have a transmission. Do you think the same engine with a transmission (as seen on ebay) would be better or worse for drifting.
And another quick question, can it hold long drifts around corners? Just wondering.
sblack101 year ago
What Wheels did you use?
grapenut2 years ago
Just to clarify; Why is it that your feet are not going around in circles (on the pedals) as the trike moves forward. Is there some type of free spooling sprocket or something up there that works similarly to most rear wheel sprockets. I probably used all the wrong terms, but I hope you get my meanin.
on my one im just going to rig some stunt pegs on just as foot pegs
josh333 (author)  grapenut2 years ago
Yep, there is a freewheel mechanism in the front hub which stops them from spinning..
bmccourt2 years ago
hello where did you buy the back sprocket from?? i cant find any!
josh333 (author)  bmccourt2 years ago
poket bike store on ebay, they are pretty common
what about the pilow bearings?
kidgambit2 years ago
could u use the same nut tighten like u did with the wheel to the sprocket
ok so this might be stupid but whats the purpose of the wheel hub next to the sproket....

to be honest i dont reall know what a wheel hub is
msottile13 years ago
I can't find wheel hub to fix the sprocket! Can you post a link please?
nibbler1253 years ago
you have to much rake on the front wheel. The forks should be at a 90degree angle to the ground. it will help you drift allot.
yungThinker3 years ago
over all how much did it cost to make because i am thinking of making one and are on a low budget,
1-40 of 81Next »