Instructables
loading
loading
Picture of MouseBot
SDC10360.JPG
This is MouseBot. Robot that moves forward and when touch wall or something it go back or sidestep it.
NOTE: while i was recording the video batteries ... died :D and mouse stopped ... a moment later the camera stopped too :D
 
Remove these adsRemove these ads by Signing Up

Step 1: EL. Scheme and princip of work.

Picture of EL. Scheme and princip of work.
FA0KLB1F2L4FTPI.gif
FOM7K07F2L4FTPO.gif
I downloaded the schemes from the net. It's working! :)

Step 2: Materials & Tools

Picture of Materials & Tools
To make this robot you need:
TOOLS:
>scissors
>pliers
>pen
>knife
>ruler
MATERIALS
>battery hold
>CD
>wires
>2 batteries
>2 switches
>2 motors
>power switch

Step 3: Draw and Cut the CD

Picture of Draw and Cut the CD
SDC10328.JPG
SDC10330.JPG
You must cut pieces like on the photos.
Remove the outside parts (part 1 and 2 on the photo) ,they are unnecessary.

Step 4: Glue the parts together

Picture of Glue the parts together
The body must look something close to the picture ,but in fact you can experiment with the appearance =]]

Step 5: Connect the wires

Picture of Connect the wires
SDC10338.jpg
SDC10347 (3).jpg
Solder the wires to the elements (motors ,battery hold ,etc.).

Step 6: Connect all together

Picture of Connect all together
SDC10359.JPG
Connect all together. Glue the battery hold and motors to the body. Power switch and switches too. And connect wires. You can put on tale and mustaches on the robot..
It's done =]]
Goodhart3 years ago
Um, I don't mean to be critical but when I saw the title "Mouse Bot" I assumed a computer mouse was being used....This "appears" as though it could be adapted into a mouse body though. :-)
ProBodger3 years ago
Nice, I will definately give this a go.