Instructables
Picture of Moustache Glass Markers
These markers will help your guests identify their drinking glasses during parties(*), and the moustache shapes are sure to be a funny icebreaker.

In a hurry trying to find an idea for a quick, funny, last-minute present, I was inspired by the many moustache projects that can be found around here.

(*) Go green: instead of taking many disposable paper/plastic cups, reuse your drinkware!
 
Remove these adsRemove these ads by Signing Up

Step 1: Needed Things

Picture of Needed Things
Many kinds of plastic or wood can be used. Using black plastic can significantly speed-up this project.

I had some scrap Plexiglas leftover from another DIY project.

You will need:
  • 3mm thick plastic, or Plexiglas or plywood
  • paper glue
  • miniature clothespins (the smaller the better)
  • power- or hand- jigsaw
  • epoxy glue
  • black paint
  • sand paper, files

Step 2: Design, Print and Glue

Picture of Design, Print and Glue
IMG_1419.jpg
IMG_1420.jpg
Design your own moustaches or use the attached document.

You can use a vector drawing software (like Inkscape or OpenOffice.org Draw). Splines are fun to design moustaches.

Print and glue the design on the plastic.

Step 3: Cut, File and Sand Shapes

Picture of Cut, File and Sand Shapes
IMG_1422.jpg
IMG_1424.jpg
IMG_1423.jpg
Cut the shapes.

Sand and file the sides until satisfied.

Step 4: Remove Paper and Paint Shapes

Picture of Remove Paper and Paint Shapes
IMG_1434.jpg
IMG_1435.jpg
Soak the shapes into water for a couple of minutes until the paper comes off.

Sand the surfaces if you intend to paint the pieces.

Clean and paint the pieces.

Step 6: Use!

Clip the moustaches on any kind of drinkware, and sip with distinction!
JungleMugsy2 years ago
I think I will have to make some of these for new years
tinker2343 years ago
hey just a thought i am going to have 18 pepole in my home tonight could i use black counstruct paper and a marker and tape to make them in a pinch
dombeef3 years ago
Mustache Cash Stash
._.
You might be the next martha stewart. But cooler.
laxap (author)  octopuscabbage3 years ago
Who is Martha Stewart?
I don't know.
Jayefuu3 years ago
Nice! Think I might laser cut some tomorrow :D
ChrysN3 years ago
Love it! That is a clever idea.
Dr. Pepper3 years ago
Sweet!
seamster3 years ago
Nice!