Step 2: Preparation: Tools
This is a great project to learn how to solder. It only takes about 15 minutes to put together, too. There are a ton of great instructables on how to solder (one here).
Tools
You'll need a few tools to assemble the project;
1 - Soldering Iron and solder. Leaded solder is easier to work with, and a 15-40 watt iron is just fine. A conical or chisel tip works well.
2 - Dikes. Diagonal cutters are used to trim the excess leads from components after soldering them down.
3 - Batteries. Mr. Buzz needs 4xAA rechargeable NiMh batteries.
Tools
You'll need a few tools to assemble the project;
1 - Soldering Iron and solder. Leaded solder is easier to work with, and a 15-40 watt iron is just fine. A conical or chisel tip works well.
2 - Dikes. Diagonal cutters are used to trim the excess leads from components after soldering them down.
3 - Batteries. Mr. Buzz needs 4xAA rechargeable
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
