Hello everyone!

In this tutorial I will explain how to create a project that includes many sensors and functions .

The material we need is:

– Arduino Uno

– Breadboard

– 12 LED

– 3 resistors - 220Ohm

– 2/3 resistors - 1KOhm

– 1 photoresistor

– 1 buzzer

– 1 humidity and temp sensor DHT11

– 1 tilt sensor

– 1 display LCD 16×02

Step 1: The Circuit

We mount the circuit as described in the image or open the ".fzz" file with Fritzing.

Step 2: Load the .ino File on Arduino Shield

Now , download the file ".ino" and load it in your Arduino board.

<p>Pretty cool gadget. How have you been using it? It would be neat to build a mount for it, like a thermostat, to display the sensor values. I'd love to see more ideas about expanding this and putting it to use.</p>
<p>Thanks!<br>I would also implement the flame sensor, proximity sensor and PIR.</p>

About This Instructable




More by dev.alessiobigini:LEDFader Arduino Library How to Program a LilyPad Without FTDI Converter Control Arduino from PC 
Add instructable to: