Introduction: Multi Vitamin (or Whatever) Container

Picture of Multi Vitamin (or Whatever) Container

Here is how to make a simple pill container.

I find it's a great way to carry a few multi-vitamins or aspirin while camping.

Step 1: What You'll Need:

Picture of What You'll Need:

1. Metal Lathe and tooling
2. Tap and Die
3. Bar Stock

Step 2:

Picture of

Turn your bar stock to the diameter of your Die, then thread.

Cut the threaded "top" of your container off of your bar stock.

Step 3:

Picture of

Drill out you bar stock and tap.

Step 4:

Picture of

Finish the exterior, cut free from remaining bar stock, and you're good to go.

Easy as that.


KevinAlien26 (author)2012-04-22

Very nice look. Also, the possibilities of this are amazing. add in a rubber washer and make it water proof for headphones or tinder. Great Design!

About This Instructable




More by nchittim:Making an extra large brand, to brand things.How to Powder Coat muliplte colors, (specifically how to add safety stripes to dangerous things)Multi Vitamin (or whatever) Container
Add instructable to: