Multimeter Holder

474

1

1

Posted

Introduction: Multimeter Holder

This instructable will show you how to create a multimeter holder for easier measuring the electricity of objects.

Step 1: Materials

Materials:
Multimeter
Multimeter Test Leads
Velcro Tape
Duct Tape or Staple Gun
Wood

Step 2: Assembling

Put a piece of Velcro tape about 3/4 of the Multimeter and place it on the center of the multimeter. Now place a similar size swatch of the reciprocating side of the Velcro tape on to a piece of wood.
Next put in your wires and weave them around the board of wood until there the end of the test leads have reached a good sized space (look at picture for a better discription). Next press duct tape or use a staple gun to hold down the wires. I would recommend some sort of brackets or a staple gun because you would not have to re applying them.

Share

Recommendations

  • Remote Control Contest 2017

    Remote Control Contest 2017
  • Arduino Contest 2017

    Arduino Contest 2017
  • LED Contest 2017

    LED Contest 2017

We have a be nice policy.
Please be positive and constructive.

Tips

Questions & Answers

Comments

THIS IS AWESOME!!