Introduction: Multiplexing NodeMCU & Sending 8 Analog Values to ThingSpeak

Picture of Multiplexing NodeMCU & Sending 8 Analog Values to ThingSpeak

A simple test to multiple analog pin of NodeMCU (ESP8266) with IC 4051 as the multiplexer (I used CD4051BE), then send its 8 analog values from potentiometers to displayed on ThingSpeak IoT platform.

Step 1: Demo

==========================================================

Please wait for its fully instructables. Now I'm trying to make its tutorial complete as soon as possible. Don't forget to like, share & subscribe if you love this project. See ya on the next project! Thank you very much.

==========================================================

Email : lintangwisesa@ymail.com

Facebook : simpLINnovation

Twitter : @Lintang_Wisesa

Blog : simpLINnovation.id

Youtube : simpLINnovation channel

Comments

sondagalega (author)2017-12-07

code please

its a very good project

About This Instructable

280views

2favorites

License:

Bio: Nothing special ^_^
More by Lintang_Wisesa:ESP8266 NodeMCU, Netpie.io & Freeboard.io ESP8266 NodeMCU, Sparkfun Phant.io & Freeboard.ioESP8266 NodeMCU & Thethings.io MQTT
Add instructable to: