Step 4: Construction: Steps 1, 2
1. Turn down (to the inside) a narrow hem along each side of the top edge (this will form the opening for the top of the hanger); use a zigzag stitch if the material might fray.
2. With right sides of material together, stitch a 1/4 inch (7 mm) seam along the two shoulder sides of the hanger pattern, leaving the smaller hemmed top and lower edges open (either use a serger or stitch a straight seam and zigzag the edges). Zigzag (or serge) all around the lower edge, then turn up a narrow hem (3/8-1/2 inch or 10-13 mm) and straight-stitch it in place.
2. With right sides of material together, stitch a 1/4 inch (7 mm) seam along the two shoulder sides of the hanger pattern, leaving the smaller hemmed top and lower edges open (either use a serger or stitch a straight seam and zigzag the edges). Zigzag (or serge) all around the lower edge, then turn up a narrow hem (3/8-1/2 inch or 10-13 mm) and straight-stitch it in place.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
