Step 10: SEAL EDGES OF COR-PLAST
Preface: since this is corrugated plastic, there are openings around the cut edges. Which could allow water or other debris inside the plastic sheets.
Apply small pieces of black duck tape to the exposed edges of each oval masks.
Continue all around until it's completely sealed.
(I also added black duck tape to the outside side panels simply because I didn't want to paint again)
Apply small pieces of black duck tape to the exposed edges of each oval masks.
Continue all around until it's completely sealed.
(I also added black duck tape to the outside side panels simply because I didn't want to paint again)
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
