Step 14: SECURE TO FLAG POLE
Using a telescoping flag pole, extend the top portions of the pole.
Run the pole through the inside of the mask.
Attach the small carabiner to the top bolt of the mask and connect it to the top loop of the flag pole. (this is used as a failsafe)
While pulling the mask down to keep the carabiner taught, secure the top bolt to the pole with a paracord using a Square Lashing knot. (http://www.animatedknots.com/lashsquare/)
With the other paracord, do the same to the pole and the bottom bolt.
Run the pole through the inside of the mask.
Attach the small carabiner to the top bolt of the mask and connect it to the top loop of the flag pole. (this is used as a failsafe)
While pulling the mask down to keep the carabiner taught, secure the top bolt to the pole with a paracord using a Square Lashing knot. (http://www.animatedknots.com/lashsquare/)
With the other paracord, do the same to the pole and the bottom bolt.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
