Step 4: PAINTING BLACK AREAS
Preface: For the black areas I used acrylic paint because it needed to be solid and opaque. It's been a while since art class so I don't know if acrylic was the best choice, as I experienced some peeling problems when trying to remove the blue tape. I basically had to cut the black paint before peeling back the blue tape.
Paint ONLY the blue-taped side of both oval mask shapes. (This should take a couple coats)
Hold up to light after each coat to make sure the black areas are solid.
Once dry, carefully peel off all of the blue tape.
Paint ONLY the blue-taped side of both oval mask shapes. (This should take a couple coats)
Hold up to light after each coat to make sure the black areas are solid.
Once dry, carefully peel off all of the blue tape.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
