Music and Guitar Stand Upcycled from old wooden Crutches

Step 4

Now we will take care of the other end (arm end) of the crutch. If your crutch still has the padding remove it, mine didn't have it so it's not shown. It should just pull right off leaving the wood exposed. Measure 6" from the last hole for hand grip. You will then cut both support pieces, being careful not to knock them loose from the wood arm rest. If they do come loose you will need to re-glue them with wood glue as we will use this part for the guitar stand portion of this project.

The second image shown here is actually from a future step in this process but I wanted you to see why we will need both halves of this crutch.