Print PDF
Favorite
Email
Step 7Sew On Snap Connections
On the back of the bra, sew on snaps on the outside of the bra with conductive thread. Make sure the snap is on top of the circuit path underneath. This is where the circuit board will be connected. I would stagger the pins so they do not touch each other and short circuit.
Make sure that the pins are secured strongly. Place a dab of hot glue on the threaded knots on the underside of the bra.
Make sure that the pins are secured strongly. Place a dab of hot glue on the threaded knots on the underside of the bra.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
