Instructables
Picture of Musical Fruit using Drawdio
By connecting some fruit or vegetables together then either by using resistors or wires.
 
Remove these adsRemove these ads by Signing Up

Step 1: Drawdio circuit Board

First construct a drawdio circuit board

Step 2: Fruits or vegies

Picture of Fruits or vegies
Pic fruits or vegies that have a high amout of liquid in side

Step 3: Wiring the fuit

Picture of Wiring the fuit
100_0551.JPG
Start inserting wires or resistor depending how variant you want the sounds

Step 4: Connect Drawdio

Picture of Connect Drawdio
Next Pick the fluid that is going to be the base and use a alligator clamp (or a soldered wire on the drawdio) in one of the fruits

Step 5:

Picture of
Lastly use another allegator clamp (or wire) accross the fruit of you choice