Instructables

Musical Fruit using Drawdio

Picture of Musical Fruit using Drawdio
By connecting some fruit or vegetables together then either by using resistors or wires.
 
Remove these adsRemove these ads by Signing Up

Step 1: Drawdio circuit Board

First construct a drawdio circuit board

Step 2: Fruits or vegies

Picture of Fruits or vegies
Pic fruits or vegies that have a high amout of liquid in side

Step 3: Wiring the fuit

Picture of Wiring the fuit
100_0551.JPG
Start inserting wires or resistor depending how variant you want the sounds

Step 4: Connect Drawdio

Picture of Connect Drawdio
Next Pick the fluid that is going to be the base and use a alligator clamp (or a soldered wire on the drawdio) in one of the fruits

Step 5:

Picture of
Lastly use another allegator clamp (or wire) accross the fruit of you choice