Hello !

This is the instructions of my " D50 " .
It' s a small gun , bu it' s got double cannons ! It' s very powerful too ...
But the shoots are not in the same time and the trigger is not really good , sorry ...

In the fist picture , you can see a red connector on the trigger : it isn' t on the instructions , but that' s not important ...

The instructions of my others guns coming soon .

This is my first instructions , so please comment ...

P.S : Sorry for my bad English , but I' m French and I' m 12 ...

- Guiguivinvin -

Step 1: Parts List

Connectors :

2 green
2 yellow
2 orange
4 red
22 grey

Rods :

4 green
7 white
2 blue
4 yellow

Others :

2 blue / grey spacers
3 light blue circle spacers
2 black connectors ( for " K' nex men " )
4 , 5 or 6 rubberbands

Step 2: The Handle

1. Get these pieces
2. Make that
3. Make that two time
4. Get these pieces
5. Put the yellow connectors on the blue rods
6. Make that

Step 3: The Cannons

1. Get these pieces
2. Make that and put tape on the intersection of the orange connectors and the yellow rods ( it isn' t on the picture , sorry ... )
3. Make that two times

Step 4: Assembly

1. Put the cannons on the handles , put the black connectors ( see step 2 ) on the yellow connectors and get these pieces .
2. Put the white rods on the red and green connectors and put the circle spacers on the white rods
3. Put the other handle

Step 5: Rubberbands , Loadind and Firing

1 , 2 , 3 and 4 . Put the rubberbands like that ...

Loading :

Pull the orange connectors .

Firing :

Hold the double cannon and push the blue spacers on left and right .

( A video coming soon for the loadind and firing ... )