This is the instructions of my " D50 " .
It' s a small gun , bu it' s got double cannons ! It' s very powerful too ...
But the shoots are not in the same time and the trigger is not really good , sorry ...
In the fist picture , you can see a red connector on the trigger : it isn' t on the instructions , but that' s not important ...
The instructions of my others guns coming soon .
This is my first instructions , so please comment ...
P.S : Sorry for my bad English , but I' m French and I' m 12 ...
- Guiguivinvin -
Step 1: Parts list
2 blue / grey spacers
3 light blue circle spacers
2 black connectors ( for " K' nex men " )
4 , 5 or 6 rubberbands
Step 2: The handle
2. Make that
3. Make that two time
4. Get these pieces
5. Put the yellow connectors on the blue rods
6. Make that
Step 3: The cannons
2. Make that and put tape on the intersection of the orange connectors and the yellow rods ( it isn' t on the picture , sorry ... )
3. Make that two times
Step 4: Assembly
2. Put the white rods on the red and green connectors and put the circle spacers on the white rods
3. Put the other handle
Step 5: Rubberbands , loadind and firing
Pull the orange connectors .
Hold the double cannon and push the blue spacers on left and right .
( A video coming soon for the loadind and firing ... )