Step 3: Here we go again...

 Now to cut the box lid.  I tried to line up the more aerodynamic guitar body in a position that would conserve as much graphic as possible.  Hopefully you're better at woodworking than I am.
what the sacrifice your own guitar.....
it's only a sacrifice if it was nice to begin with... here, a peice of junk was turned into art, in a creative way.... sacrifice is pulling a pete townsend!<br>
you could also rewire it so that you can run both pickups from the same jack and even at the same time
Great instructable! I've got a cigar box just waiting for something like this. I also have a question though: What tune is &quot;walking blues&quot; and who plays it?<br>It's very familiar to me, but I can't seem to place it. No luck searching online so far, either, but I won't stop 'til I figure it out. :)<br><br>Thanks again
Thanks man. The sheet music I have says that &quot;Walking Blues&quot; is by Robert Johnson but I've yet to hear a recording myself. If you find it let me know.
All makers of classic one-of-a-kind guitars should hear the &quot;King of the Delta Blues Singers&quot; So here you go!<br> http://www.youtube.com/watch?v=x2-EL6Pk2L0<br> Enjoy!
Pardon my french, but this is f*cking lunacy. Cutting up a perfectly fine guitar body, no matter how cheap, if just so so so wrong. Don't get me wrong, though, I really like the idea behind that project and there's no reason not to cannibalize cheap guitars for parts for such projects Here's what I would do on the cheap: Take measurements of the guitar body (i.e. depth of pickup cavity, distance between neck pocket and bridge, etc) then go to your local hardware store. If they're cutting plywood for customers, there's likely to be some scraps and leftovers and if you ask them nicely, they might let you look through them. With those pieces, you'll most likely find something to sandwich together a bare-minimum guitar body, just like what you made by reducing that guitar body. Not only will this save you a guitar body for a later project, it's probably a lot easier than what you did.
Let them do what they want, if you want to go around and save every abused First Act guitar out there, go ahead. It's not like he just cut up a Les Paul.(That would be blasphemy) He took an El Cheapo and turned it into a one of a kind guitar.
I have made several guitars using a similar method. I will never cut up or tear apart a quality guitar but i have used an epiphone les paul jr. that was beat to crap and i gave it a new life as a unique instrument. But the wood these guitars are made of and even low end big name guitars are made what is basically saw dust and glue. Even cheap parts are some what expensive to get and this just makes it easier without spending a large chunk of change
It's all in the &quot;eye of the beholder&quot; my friend. What may look like a good guitar body to some, looks like a giant cookie cutter to others. It may have been the lazier way to go about a project like this, but that's what I'm all about. :)
full scale travel guitar is what i'm thinking. nice job man
I like it! Regardless of what other people might think or say! It is a cool little project in the &quot;style&quot; of a cigarbox guitar and as soon as I find a cheap old guitar and jewelry box etc I am going to try it! You now have a very PERSONAL guitar rather then a cheap guitar and a cheap jewelry box and you should be proud of it!
Yeah, I've been there...tin can microphone? Sounds cool.
Cool stuff. I'm sure you've been to www.cigarboxnation.com to see their stuffs. have you looked at making a tin can microphone yet? they actually sound pretty great.
I would suggest you replace the title and add some keywords with<br /> <br /> &quot;cigar box guitar&quot; it's more recogniceable and will allow more users to come by your ible :)<br /> <br /> This is the term the community of cigar box guitar builders uses so I think that would be more convienient to use :)<br /> <br /> Just a suggestion.<br /> <br /> <br /> nice ible btw<br />
But that would be intellectually dishonest, he didn't use a cigar box.<br />
&nbsp;Yeah, my options were either &quot;box guitar&quot; or &quot;jewelery box guitar&quot;. &nbsp;I went with the one that I wouldn't be embarrassed to play AC/DC on.
Yeah I get where you're coming from.<br /> <br /> You're right although it's in the style of a cigar box guitar, since it doesn't really use one you can't really call it that indeed.<br /> <br /> I didn't say anything :)<br />
Hows the intonation?&nbsp; Do all the notes sound in tune from fret 1 to the highest fret?&nbsp;&nbsp;I can see that you did not place the bridge at 2x the distance from the nut of the neck to the middle of the 12th fret, so I was just wondering how good it sounds.<br />
&nbsp;It keeps it tune well so far. &nbsp;I didn't really change any of the measurements from the original guitar. &nbsp;I did have to adjust the action at the bridge a little, but I planned to do that anyway to aid in my wanna-be slide guitar playing skills. &nbsp;I plan on posting video of it in action when I'm darn well ready. :)
&nbsp;What an &quot;f&quot; hole... Sorry couldn't resist... Nice ible.

About This Instructable


51 favorites


More by jackbrass: Carne Asada Torta My First Box Guitar
Add instructable to: