My Maisto 1/18 Car With CHP Lights

Published

Introduction: My Maisto 1/18 Car With CHP Lights

Step 1: Get the Supplies

Make sure you have the following:
- sotering tools
- + and - wires (red and black)
- LEDs
- 9v battery

Step 2: Wire the Lights

Make sure you are wiring the lights correctly. Red is - and black is +.

Step 3: Make Sure That They Flash

You need sotering for these to flash. DO A LIGHT TEST BEFORE INSTALLING. this may take weeks to complete.

Step 4: Install the Lights

Using glue (NOT SCHOOL GLUE) install the lights on to the car. BE EXTRA CAREFUL NOT TO GLUE THE WIRES. drying time varies depending on what glue you use.

Share

    Recommendations

    • Oil Contest

      Oil Contest
    • Creative Misuse Contest

      Creative Misuse Contest
    • Water Contest

      Water Contest

    Discussions