With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
How to build 8x10 feet simple Pergola for your backyard that you can grow Grape vine right next to it and it will eventually cover it for you and give...
Here is the list of material: I suggest to use Redwood. Item Size Qty Post 4x4x8 4 Rafter 2x4x10 7 Beam 2x6x12 2 Hex Bolt 4x1/2 8 Washer 1/2 16 Nut ...
Rafters: Notch rafters at each side of 2x4"x10' rafters, 12inches inside and 1.5 inches width with 1 3/4 depth, this notch will be used to sit on 2x6 ...
it is important to apply a protective coat on the woods after cutting and it is easier before assembly. it is better to apply 2 layers of coat. my wif...
Dig 4 holes 8 by 10 feet rectangular, 1 feet deep and about 1 feet diameter. some people say it needs to be 2 feet deep but i think 1 feet is enough a...
Now it is time to Bolt Beams and Posts together. lay 2 posts 10 feet apart and place the beam on the sides that was cut out. Note that the first notch...
Place bolted beams and posts into the dug holes, you might need 3 people, 2 to hold the posts & beams, and one person should bring the rafters and ins...
before Pouring cement, level the posts, if required use rock under the post to lift them, this is the hardest part, play with it until you find the be...
First remember to water cement for next couple of days to cure. Next day when concrete is dry, nail the rafters from top into the notches, i used 16d...
Remove these ads by
Signing Up
Not NiceInappropriateSpam6,252 views
37 favorites
Posted:
May 23, 2012
License:
None (All Rights Reserved)
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »